Vibration TransmittersPRODUCT FAMILIES / TRANSMITTERS BY TYPE
Industrial vibration sensors.
Five paths to your plant data.
Choose analog, digital, wireless, harsh-duty or relay monitoring. Start with the machine and the control interface, then confirm the configuration.
Compare signal interfaces ↓
Match the monitoring task to your control interface.
Compare request profiles, then open the family guide or carry a profile into your RFQ. Confirm ranges, mounting and released ratings during the configuration review.
| Request profile | Measurement | Interface / check before ordering | Prepare the request |
|---|---|---|---|
| VTX-420 Standard loop-powered velocity | Velocity RMS or Peak | M12 / MIL / integral cable Confirm detector, full scale, supply/load and pinout. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-420-LF Low-speed machine velocity | Low-frequency velocity | Top or side exit Verify mounted low-frequency response and noise at actual RPM. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-420T Velocity plus surface temperature | Velocity + temperature | Separate temperature conductors / loop Specify PT100 or current output and the full wiring topology. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-420D Velocity plus buffered dynamic output | 4–20mA + dynamic acceleration | Separate dynamic acquisition connection Confirm dynamic sensitivity, bias, power and analyzer loading. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-MOD Triaxial Modbus vibration + temperature | X/Y/Z features + °C | RS485 Modbus RTU Request register map, data type, units, scale and word order. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-MOD-IOL IO-Link vibration + temperature | Axis count and process data to confirm | One sensor per IO-Link master port Request IODD, master port requirements and process-data layout. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-SCR Screen stroke / heavy-duty motion | 0–10 / 20 mm peak-to-peak requested | 4–20mA + protected cable Specify stroke, frequency, shock and cable restraint drawing. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-420-EX Hazardous-area configuration review | Velocity / acceleration by configuration | 1/2 NPT / M20 conduit request Certification availability, full marking and loop parameters require review. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-WLS Wireless vibration + temperature node | Triaxial features + °C requested | LoRaWAN or separate WirelessHART option Confirm radio region, duty cycle, battery, gateway and local data path. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-GW Local industrial gateway kit | Node aggregation / plant integration | MQTT / Modbus TCP, OPC UA by review Specify protocol, local server, licensing, offline operation and support scope. | Configure RFQ → |
| VTX-SW Electronic vibration relay monitor | Alarm / trip setpoint review | Relay + optional current output Confirm external supply, startup delay, reset and power-loss state. | Configure RFQ →Request 2–5 evaluation units → |
| VTX-DIN DIN-rail display + alarm monitor | 4–20mA process input / local display | 35 mm rail / panel format by option Confirm whether the input powers the loop, relay rating and reset logic. | Configure RFQ →Request 2–5 evaluation units → |
For hazardous areas, include the zone, gas/dust group and required certificate scheme. Certification availability is reviewed for the exact configuration. Evaluation-unit pricing, availability and acceptance criteria are confirmed in writing.
Review the wiring, mounting and data path for each family.
4–20mA velocity vibration transmitters
Two wires. One useful vibration trend.
Review configuration
RS485 Modbus & IO-Link vibration sensors
Vibration and temperature, in the same data path.
Review configurationWireless IoT vibration transmitters & gateways
Monitor remote assets without a signal cable.
Review configuration
Mining screen & harsh-duty vibration sensors
Measure the process motion before judging the machine.
Review configuration
Electronic vibration switches & shutdown monitors
Make alarm behavior part of the specification.
Review configurationPLANT-WIDE QUOTE / CAD REVIEW
Specify the signal.
Send the complete brief.
Include the machine, original model and control input. Attach a nameplate or asset list and request the drawings and records needed for purchasing.
[email protected]Prefilled email carries your current selections. Add the listed files in your email client.
Ask for sensor-only and installation-kit line items at your exact quantity. Studs, calibration scope, warranty and delivery will appear in the written quote.
Download the asset-list CSVPreview the current email brief
Vibration Transmitters | Plant-wide vibration monitoring RFQ Name: Request profile: Configuration review Request purpose: Configuration advice / project review Band: Confirm band and response tolerance Exact quantity: To confirm Wireless kit: Not selected Documents requested: None Company / plant: Reply email: Series entry: Unspecified Machine: Electric motors, pumps & fans Output: 2-wire 4–20mA velocity [RMS / Peak by configuration] Range: Confirm range / digital features in brief Connector / mounting: Other / confirm with drawing Mounting thread: Confirm thread, gender and depth in brief Connection exit: Confirm from model / clearance drawing Original pinout to review: To confirm from drawing Detector: Confirm per configuration Original model: Not specified Quantity band: 1-5 Accessories: None Source: /products/ Operating speed / RPM: To confirm Ambient / bearing temperature: To confirm PLC / receiving system: To confirm Destination country / site: To confirm Interface and operating requirements: To confirm during configuration review Project brief: Configuration, certification, compatibility, price and delivery subject to written review.